Orange World eSIM | 4G/LTE | 1GB-20GB total for 30 days | 24-hour billing | QR code

NA

[eSIM Requirements] Device must support eSIM functionality: Dial *#06# on the dialing screen. If EID is shown, the device supports eSIM. If no EID is displayed, eSIM cannot be used. Device must be unlocked: Confirm with the carrier whether the device is locked to a specific network. Please ensure the device meets these requirements before purchase for proper eSIM usage. [Setting up eSIM] Please install and activate the eSIM after arriving at the destination while connected to the network. Installing the eSIM in a non-destination country/region may cause the eSIM to become invalid or cause usage time to be calculated prematurely. If installation issues occur, please refer to the usage guide. [Enable Data Roaming] Ensure the "Data Roaming" option is enabled for the eSIM. [Network Information] Signal quality may be affected by factors such as location, terrain, building obstructions, number of users, and weather. Actual connectivity depends on the local carrier's coverage. If 5G is unavailable, the device will automatically connect to 4G/LTE. [Hotspot Sharing] Hotspot sharing is supported, but due to device differences, it cannot be guaranteed that all devices will be able to share. [Do not delete eSIM after installation] A QR Code can only be used on one device. After installation, it will be bound to that device and cannot be transferred to another device. [Helpful Tips] • One eSIM QR code can only be used on one phone. Once installed, it is bound to the device and cannot be transferred. • Please ensure you have a stable internet connection during installation. • Upon arrival, please turn on "Data Roaming" to use the service. [Step 1: Install eSIM] (Choose one) * Method A: One-click installation (Recommended for iPhone iOS 17.4+, not supported on Android) • Open Trip.com App → Account → All Bookings → Click "Install". * Method B: Scan QR Code or Manual Installation Scan the QR Code in your voucher; if you cannot scan, manually enter the SM-DP+ Address and Activation Code. • iPhone: Settings > Cellular > Add eSIM • Android: Settings > Network & Internet > SIMs > Add SIM [Step 2: Activate upon arrival] 1. Enable Plan: Go to settings and turn this eSIM "On". 2. Switch Data: Set this eSIM as the default Cellular Data. We recommend turning off VPN and configuration profiles. 3. Enter PIN: Default PIN is 0000. 4. Enable Roaming: Turn on "Data Roaming". Wait 1–3 minutes for the network to connect. [Troubleshooting: Manual APN] 1. If traveling across regions and cannot connect, please set APN manually. 2. Path: Cellular/Mobile Data > Cellular Data Network 3. Enter APN Parameters: APN: orange Username: orange Password: orange 4. Save and restart phone. [Self-Service Inquiry] 1. Check remaining data / calls / SMS: dial #123# 2. Check phone number: dial 225 3. Dialing method: 00 + country code + phone number. If calls cannot connect, try switching the network operator